|
Pumps Catalog:
|
Heating Circulating Pumps |
|
In-Line Close-Coupled Canned Motor
|
Designed for providing forced circulation in hot water heating systems of individual houses and buildings (ETsL 2-3,5), communal power generation projects and industrial structures (ETsL 16-10), as well as for increasing the flow velocity (as accelerators for hot water). Used especially in heating plants at pumping temperatures up to 110°C.
In-line horizontal shaft single-stage close-coupled canned motor centrifugal pumps (glandless pumps). Wet rotor motor and medium lubricated plain bearings. The in-line construction (of I-type) allows installing the motor pump into either the outlet or return line of a water circuit. Motor speed is controllable in three (ETsL 2-3,5) or two (ETsL 16-10)
steps.
|
ETsL
|
|
Pump
make
|
Capacity,
m3/h
|
Head,
m
|
Rotational
speed, rpm
|
Power
of
motor, kW
|
|
ETsL 2-3,5
|
2
|
3.5
|
1530/1950/2230
|
0.83
|
|
ETsL 16-10
|
16
|
10
|
2500/2810
|
1.05
|
|
TsNTs 5-10*
|
5
|
10
|
3000
|
0.55
|
NOTE: *Pumping temperature is max. 70°C
|
|
In-Line Close-Coupled
|
Designed for handling water (except sea water) and other liquids (similar to it by their density, viscosity and chemical activity) at pumping temperatures up to 120°C.
Horizontal or vertical* shaft in-line close-coupled single-stage volute-casing centrifugal pumps with flange connections and additional support. Driven by hermetically sealed
motors.
|
| KML
|
|
Pump
make
|
Capacity,
m3/h
|
Head,
m
|
Rotational
speed, rpm
|
Max.
power
input, kW
|
|
KML 50-12.5-20
|
12.5
|
20
|
2900
|
1.2
|
|
KML 65-25-32
|
25
|
32
|
2900
|
3.7
|
|
KML 80-25-12.5
|
25
|
12.5
|
1450
|
1.5
|
|
KML 80-50-32
|
50
|
32
|
2900
|
6.7
|
|
KML 80-50-50
|
50
|
50
|
2900
|
11.4
|
|
KML 100-50-12.5
|
50
|
12.5
|
1450
|
2.6
|
|
KML 100-100-50
|
100
|
50
|
2900
|
21
|
*Only vertical shaft in case of pumps driven by motors for nominal power of 15 kW and above
|
|